Table of Contents
Advertisement
(C C
Button No. 1
) Button
Moves the cursor downward when the setup menu
is monitored.
Moves the zoomed picture downward when the
zoomed picture is monitored.
(D D
Button No. 2
) Button:
Moves the cursor upward when the setup menu is
monitored.
Moves the zoomed picture upward when the
zoomed picture is monitored.
(A A
Button No. 3
) Button
Moves the cursor on the menu when the setup menu
is monitored.
Moves the zoomed picture to the left when the
zoomed picture is monitored.
(B B
Button No. 4
) Button
Moves the cursor on the menu when the setup menu
is monitored.
Moves the zoomed picture to the right when the
zoomed picture is monitored.
Button No. 5 (–) Button
Zooms out the zoomed picture displayed on the
monitor screen.
Moves the character selection cursor in reverse
alphabetical order.
Button No. 6 (+) Button
Zooms the picture currently displayed on the moni-
tor screen.
Moves the character selection cursor in alphabetical
order.
5. Menu/Escape Button (MENU/ESC)
This button has different functions in different
modes, as described below.
• MENU button
When monitoring picture, this button works as the
MENU button. Pressing this button for approx. 2
seconds displays the MAIN menu. Pressing it again
cancels the display of the MAIN menu.
• ESC button
When the setup menu (MAIN) is displayed on the
monitor screen, this button works as the ESC button.
Pressing this button returns to picture monitoring
from the MAIN menu.
Pressing this button returns to the previous setup
menu during the setup.
6. Mode Button (MODE)
This button selects the mode from SEQ, PLAY, EL-
ZOOM, or STILL. Press this button to select the
desired mode. The modes you can select are as fol-
lows:
SEQ: When this mode is selected, the currently
monitored pictures are displayed in sequential
order with the dwell time you set on the SEQ
SETUP menu. See page 12 for details.
Note: To use this mode for multi picture, setting
of the VCR OUT menu is required in ad-
vance. See page 8 for details.
PLAY: When this mode is selected, the playback
picture from the VCR that is connected with the
PLAY IN connector on the rear panel is dis-
played on the monitor screen. See page 19 for
details.
Note: The full-size single picture is not recorded
on VCR.
EL-ZOOM: When this mode is selected, the select-
ed playback picture is zoomed in or out by
operating the CURSOR
SELECT (+, –) buttons. See page 20 for details.
Note: This mode is not available when the full-
size single picture or camera picture is mon-
itored.
STILL: When this mode is selected, the selected
picture appears still on the monitor screen. See
page 18 for details.
Note: This mode is not available when the full-
size single picture or playback picture is
monitored.
7. Mode Indicators (SEQ, PLAY, EL-ZOOM, STILL)
These indicators are used to select the desired
mode.
Note: These indicators are used only to select the
mode. They do not indicate an activated mode.
To check the activated mode, refer "To Check
the Current Mode" on page 15.
8. Set/Reset Button (SET/RESET)
This button sets the mode that is selected by press-
ing the MODE button. Press this button after select-
ing the desired mode with the MODE button.
To reset the mode, press this button after selecting
the mode to be reset with the MODE button.
9. Video Input Connector (VIDEO IN 1....8)
These connectors accept a composite video signal
from a camera.
They are automatically terminated.
Note: If the input signals have a high jitter content,
as in the case of a VCR playback picture, it may
not be possible to synchronize this unit.
10. Video Output Connectors (VIDEO OUT 1....8)
The video input signals connected to the VIDEO IN
connector are looped through to these connectors
-4-
(C C
D D
A A
B B
,
,
,
) and the
Advertisement
Table of Contents
