Table of Contents
Advertisement
E. Still Multi Picture
This function is available for multiscreen camera
picture only.
1. Confirm that neither PLAY, EL-ZOOM nor STILL
mode is the current. If the current mode is any one
of the above, reset the mode.
2. Display the multiscreen on the monitor screen.
3. Select STILL mode by pressing the MODE button.
4. After confirming the STILL indicator is lit, press the
SET button.
5. Press the desired VIDEO SELECT button. The
selected picture appears still on the monitor screen.
ENTRANCE
Normal Camera Picture
STILL
Still Picture
(The word "STILL" blinks)
STILL?
STILL?
-18-
Notes:
• If you press the VIDEO SELECT button for a
camera whose picture is not displayed on the
monitor screen, the operation is ignored.
• The word "STILL?" appears only when ON is
selected for STILL-SEL TITLE on the SYSTEM
SETUP menu.
• While STILL mode is activated, setting the SEQ
or PLAY mode will switch the STILL mode to the
SEQ or PLAY mode.
• When the alarm signal is received the STILL
mode is canceled automatically.
• When the camera title is displayed, the word
"STILL" and the camera title appear alternately
on the monitor screen.
• The word "STILL" appears only when ON is
selected for STILL TITLE on the TITLE SETUP
menu.
Advertisement
Table of Contents
