Preface; Features; Precautions - Panasonic WV-PS154 Operating Instructions Manual

Camera drive unit
Table of Contents

Advertisement

Available languages

Available languages

PREFACE

The Panasonic WV-PS154 Camera Drive Unit drives up to
four VP (Video and Power) multiplex cameras.
This simple system is designed to meet the surveillance
and security needs of offices, factories, public and resi-
dential buildings, etc.

FEATURES

• Up to four VP multiplex cameras of the specified model
can be driven by one WV-PS154.
• A single coaxial cable connects cameras of the speci-
fied model and camera inputs to the Camera Drive Unit.
It supplies DC power, controls data and vertical drive
pulses to the cameras, and receives video and audio
(*) signals from the cameras.
(*) If an applicable camera is connected.

PRECAUTIONS

• Refer all work related to the installation of this
product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
To prevent the appliance temperature from rising, place
the appliance at least 5 cm (2 inches) away from the
wall.
• Do not drop metallic parts through slots.
This could permanently damage the appliance. Turn
the power off immediately and refer servicing to
qualified service personnel.
• Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Refer main-
tenance to qualified service personnel.
• Handle the appliance with care.
Do not strike or shake, as this may damage the appli-
ance.
3
• Controls camera setup through the specified outboard
device connected.
• VD/SYNC IN and OUT connectors provided for syn-
chronizing in parallel connection.
• Do not expose the appliance to water or moisture,
nor try to operate it in wet areas.
Do take immediate action if the appliance becomes
wet. Turn the power off and refer servicing to qualified
service personnel. Moisture can damage the appliance
and also cause electric shock.
• Do not use strong or abrasive detergents when
cleaning the appliance body.
Use a dry cloth to clean the appliance when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.
• Do not operate the appliance beyond its specified
temperature, humidity or power source ratings.
Do not use the appliance in an extreme environment
where high temperature or high humidity exists.
Use the appliance at temperatures within -10°C -
+50°C (14°F - 122°F) and a humidity below 90 %.
The input power source for this appliance is 120 V AC
60 Hz.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents