Table of Contents
Advertisement
You can set the following items:
• CAM TITLE
• TITLE SET
• TITLE POSI
• ALARM TITLE
• STILL TITLE
Note: To return to the MAIN menu, press the ESC
button.
3-6-1. CAM TITLE
This parameter lets you enable or disable the camera
title display on the monitor screen.
1. Move the cursor to the CAM TITLE parameter.
2. Select ON or OFF.
ON: Title is displayed.
OFF: Title is not displayed.
** TITLE SETUP **
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
STILL TITLE
3-6-2. TITLE SET
This parameter lets you edit a camera title.
1. Move the cursor to TITLE SET.
2. Press one of the SELECT (–, +) buttons. The EDIT-
TING menu appears on the monitor screen and "1"
starts blinking.
3. Move the cursor to the channel number whose title
is to be edited by pressing the CURSOR
B B
) buttons.
4. Select a character by pressing the SELECT (–, +)
buttons.
5. After selecting the first character, press the CUR-
(B B
SOR button
). Then select the second character.
6. Repeat steps 3 to 5 above to complete the title.
7. Repeat steps 3 to 6 to edit the other channels.
8. Press the ESC button to return to the previous
menu.
ON
ON
ON
(C C ,D D ,A A
,
** TITLE SETUP **
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
TITLE EDIT
STILL ALARM
** TITLE **
1:
1.......
2:
2.......
3:
3.......
4:
4.......
5:
5.......
6:
6.......
7:
7.......
8:
8.......
1
2
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
' " # & ( ) * + ,
- . / : ;
To erase a specific character
1. Select a character to be erased.
2. Select "•" (blank mark) to erase the character.
To erase the title of a specific channel
1. Move the cursor to a character of the title to be
erased.
2. Press the SELECT (– and +) buttons simultaneous-
ly.
3-6-3. TITLE POSI
This parameter lets you select the position on the moni-
tor screen where you want the title to be displayed.
1. Move the cursor to TITLE POSI.
2. Press one of the SELECT (–, +) buttons. The TITLE
POSITION menu with the title of channel 1 appears
on the monitor screen.
3. Select the position where the title is to be displayed
by pressing the CURSOR
4. Press the MENU button to return to the previous
menu.
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
STILL TITLE
-13-
ON
ON
ON
ON
Camera title edit area
Channel numbers
3
4
E
(blank)
(C C ,D D ,A A
B B
,
) buttons.
** TITLE SETUP **
ON
ON
ON
Advertisement
Table of Contents
