Panasonic WJ-MS488 Operating Instructions Manual page 19

C. Full Picture Pattern Sequences
Notes:
• Setting of the SEQ SETUP menu is required in
advance. See page 12 for details.
• To display the multiscreen in this mode, setting of
the VCR OUT menu is required. See page 8 for
details.
• See page 19 about recording pictures in this mode.
1. Press one of the VIDEO SELECT buttons to display
the full size single picture.
2. Select the SEQ mode (indicator lights) by pressing
the MODE button.
3. Press the SET button. The SEQ indicator goes off
and the PLAY indicator lights, then the picture is dis-
played in the sequential order with the dwell time
you set on the SEQ SETUP menu.
** VCR OUT **
QUAD A
QUAD B
3x3
** SEQ SETUP **
FULL SEQ
1: 1CH
2: 4A
3: 8CH
4: 3x3
5: 2CH
6: 3CH
7: 4A
8: 4B
9: OFF
10: OFF
Example of Full Picture Pattern Sequences.
1 CH
4A (QUAD-A)
8 CH
3 x 3
ON
ON
ON
QUAD SEQ
1: 4A 2SEC
2: 4B 2SEC
4B (QUAD-B)
4A (QUAD-A)
3 CH
2 CH
D. Quad Picture Sequences
Notes:
• Setting of the VCR OUT menu is required in
advance. See page 8 for details.
• Setting of the SEQ SETUP menu is required in
advance. See page 12 for details.
1. Press the MULTISCREEN button to display the quad
picture.
2. Select the SEQ mode (indicator lights) by pressing
the MODE button.
3. Press the SET button. The SEQ indicator goes off
and the PLAY indicator lights, then the QUAD-A and
QUAD-B are displayed alternatively with the dwell
time you set on the SEQ SETUP menu.
Example of quad picture sequence
Camera 1
Camera 5
Camera 3
Camera 7
Note: This mode is not available for 3x3 pictures.
-17-
Camera 2
Picture Picture
Camera 6
Picture Picture
QUAD-A
Camera 4
Picture Picture
Camera 8
Picture Picture
QUAD-B