Sirius XM RAdio ONYX EZ User Manual page 29

Vehicle Installation
opening.
3. Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard. Coil any
excess cable in a hidden location, such as under the carpet, keeping it
away from any vehicle pedals or controls. Secure the excess cable with
wire ties.
4. Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock.
5. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 33.
Sport Utility Vehicle (SUV)
1. Feed the antenna cable underneath the rubber weather stripping of
the rear tailgate window/door and route the cable along the rear hatch.
Lift the weather stripping from the opening and tuck the cable inside
it, then replace the weather stripping. Pull the cable out from weather
stripping and route it into the
cabin under the interior trim.
Avoid hinges or gears that could
crimp or cut the cable.
2. Route the cable through the
SUV's main cabin area under
the interior trim, towards the
front of the vehicle. Use a blunt
plastic putty knife or similar
blunt tool to lift the plastic trim
just enough to tuck the cable
29