Sirius XM RAdio ONYX EZ User Manual page 32

Vehicle Installation
stripping around the door opening. Lift the weather stripping from the
opening and tuck the cable inside it, then replace the weather stripping.
Run the cable inside of the weather stripping to the bottom of the door
opening.
4. Pull the cable out of the weather stripping at the bottom of the door
opening and route it under the carpet toward the dashboard. Coil any
excess cable in a hidden location, such as under the carpet, keeping it
away from any vehicle pedals or controls. Secure the excess cable with
wire ties.
5. Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock.
6. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 33.
32