Step 1: Choose A Location For Your; Radio; Step 2: Install The Dash Or Vent Mount - Sirius XM RAdio ONYX EZ User Manual

Vehicle Installation

Step 2: Install the Dash or Vent Mount

Follow the instructions on the next several pages for the mounting method
you have selected.
NOTE! The PowerConnect Vehicle Dock included with Onyx EZ is compatible
with the T-slot style Dash and Vent Mounts. If you have an existing Dash Mount
or Vent Mount in your vehicle, you can continue to use it with this dock, and
skip this step.
Installing the Dash Mount:
CAUTION! The adhesive used on the Dash Mount may be
difficult to remove. Do not install this mount on leather
surfaces (contact your automobile dealership if you are
unsure about your dash surface), and make sure the air
temperature is at least 60°F (15°C) during installation. If it's
not at least 60°F, turn on the heater in your vehicle to bring
the temperature up to 60°F.
1. Locate a flat surface for the Dash Mount. Make sure there is ample
room for the PowerConnect Vehicle Dock and Onyx EZ Radio when
installed.
2. Set the orientation of the Dash Mount before adhering it. Loosen the
knob and adjust the adhesive foot for the location you selected in
"Step 1: Choose a Location for
Your Radio" on page 10.
• Option 1 & Option 3
should be oriented as I.
• Option 2 should be oriented
as II.
3. The dock mounting plate can
12
1 2