2. Connect the Home Power Adapter to the red Power connector at the rear of the Home Dock, and plug it into a wall outlet. AUDIO menu 3. Place your Onyx EZ in the Home Dock. jump direct 4. Power on your Onyx EZ by pressing the Power button.
Page 4
Step 2: Place and Aim the Indoor/Outdoor Antenna 1. Check the signal strength indicator on the Radio’s screen. If there are 2 XM Preview or 3 bars of signal strength, continue with step 3. If not, continue with step B below. 866-635-2349 2.
5. The audio level of your Radio can also be adjusted, if necessary. Refer to “Set Audio Level” in the User Guide to adjust the audio level. Go to siriusxm.ca/guides for the Onyx EZ User Guide (with Home Kit). To Connect the Home Dock to Your Powered Speakers: 1.
Page 6
2. Make a note of your XM Radio ID. You can find it by selecting Radio ID in menu items, by tuning to channel 0, on a label on the bottom of the gift box, and on the label on the back of your Onyx EZ.
Press to preview and tune to channels through Press to search for Power Button the channel lineup; also press to scroll through channels by category. Press to turn Onyx EZ on lists and highlight menu items. and off. Select Button Press to confirm selection of highlighted items in a menu or list.
Onyx EZ Main Display When listening to a channel, information about the channel and what is currently playing is displayed. Channel Number Channel Name The Spectrum Artist Name Tom Petty or Talk Show Host or Sports Teams/ I Should Have Known It...
Need help?
Do you have a question about the Onyx EZ and is the answer not in the manual?
Questions and answers