Removing The Wireless Lan Module - Clevo M720T Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
4. The Wireless LAN module
5
5. Lift the Wireless LAN module
a.
1
c.
5
(page 2 - 5) and the component bay cover
on the mainboard.
1
-
, then remove screw from the module socket.
2 3 4
will pop-up.
(Figure 11d) up and off the computer.
Note:
Only one model is pic-
tured here, however
the component loca-
tions are the same for
both models.
(page 2 -
b.
d.
Removing the Wireless LAN Module 2 - 15
Disassembly
Figure 11
Wireless LAN
10) .
Module Removal
a. Remove the cover.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
4
Note: Make sure you
reconnect the antenna
cable to "1" + "2"
3
socket (Figure
2
5. WLAN Module.
• 1 Screw
b).