Removing The Keyboard - Clevo M720T Service Manual

Removing the Keyboard

1. Turn off the computer, and remove the battery
2. Press the three keyboard latches at the top of the keyboard to elevate the keyboard from its normal position (you
may need to use a small screwdriver to do this).
3. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable
4. Disconnect the keyboard ribbon cable
5. Carefully lift up the keyboard
a.
1
c.
6
(page 2 - 5).
from the locking collar socket
4
(Figure 13c) off the computer.
6
b.
3
2
(Figure 13b).
.
5
4
5
6
Keyboard Tabs
Removing the Keyboard 2 - 17
Disassembly
Figure 13
Keyboard Removal
a. Press the three latches
to release the keyboard.
b. Lift the keyboard up and
disconnect the cable
from the locking collar.
c. Remove the keyboard.
Re-Inserting the Key-
board
When re-inserting the
keyboard firstly align
the three keyboard
tabs at the bottom of
the keyboard with the
slots in the case.
6. Keyboard Module.