Removing The Processor - Clevo M720T Service Manual

Removing the Processor

1. Turn off the computer, and remove the battery
2. The CPU heat sink will be visible at point
3. Loosen screws - from the heat sink in the order indicated
2 4
4. Carefully lift up the heat sink
a.
1
c.
(page 2 - 5) and the CPU/RAM bay cover
on the mainboard.
1
(Figure c) off the computer.
5
b.
5
(page 2 -
.
Note:
Only one model is pictured
here, however the compo-
nent locations are the same
for both models.
3
4
2
Disassembly
Figure 9
Processor Removal
.
10)
a. Remove the cover and
Iocate the heat sink.
b. Remove the 3 screws in
the order indicated.
c. Remove the heat sink.
5. Heat Sink
Removing the Processor 2 - 13