Activating/Deactivating The Answering Machine; Tam Settings - SAGEMCOM D77T-V User Manual

ANSWERING MACHINE

Activating/deactivating the answering machine

This function is used to activate or deactivate your answering
machine.
Go to »Menu« / »Answ. Machine« / »Ans. On/Off«.
Press the »O O K« key to display the answering machine status.
Select »On« / »Off« by moving the browser up
Press the »O O K« key to confirm.

TAM Settings

This menu allows you to change advanced settings on your
answering machine (according to model).
Go to »Menu« / »Answ. Machine« / »Settings«.
The following functions appear on the display:
Ring Delay
Remote access
HS Screening
Delay before the answering machine answers the call
This setting is used to specify the number of times your telephone
rings before your answering machine answers the call. The
number of rings can be between 3 and 8 and you can also select
Automatic mode.
Automatic mode will automatically determine the number of
rings, depending on the number of messages stored in the
answering machine.
Go to »Menu« / »Answ. Machine« / »Settings« / »Ring Delay«.
Select the number of rings by moving the browser up
down .
Automatic: if you select "A A utomatic", the answering machine will
answer the call after the second ring if a new
message has been recorded. Otherwise it answers
after four rings. Users can therefore determine
whether or not a new message has been recorded
from the number of rings.
3~8 rings: users can also programme the number of rings
before the answering machine switches on (the
default setting is 5 rings).
(D77V only)
or down .
or
32