Inserting Batteries In The Handset - SAGEMCOM D77T-V User Manual

13
SET-UP
Pass the wires through the cable guide and place the base in its
desired location.

Inserting batteries in the handset

- Turn over the handset and open the battery unit hatch.
- Insert the connector into its slot following the direction of the
wires.
Connector
1
Battery
connection
- Slide the battery unit into its slot.
2
Remark: The battery unit characteristics label must be
oriented towards the bottom.
- Put the battery unit hatch back in its place.
3
The used battery unit must be disposed of complying with the
recycling instructions in the Environment paragraph of this
booklet.
Only use rechargeable battery units NiMH 2.4V 600 mAh. On
first use, to ensure maximum charging, leave the handset on the
base unit for at least 12 hours. While charging, the battery may
heat up. This is normal and presents no danger.
Red wire
Insertion
Black wire
direction
Red wire
Black wire
Red wire Battery unit hatch
Black wire
battery unit