Resetting The Model 70; Performing A Soft Reset; Clearing Memory (Resetting To Factory Defaults) - Intermec 70 User Manual

7
Troubleshooting
This chapter helps you troubleshoot problems you may experience with the Model 70
Pocket PC 2002.

Resetting the Model 70

You can perform a soft reset or a full reset. If your Model 70 responds slowly, stops
responding as expected, or "freezes," try soft resetting it. If you want to clear all data
from your Model 70 and return it to the factory defaults or if you forget your password,
you need to perform a full reset and clear the memory.

Performing a Soft Reset

A soft reset causes the Model 70 to restart and re-adjust memory allocation. Unsaved
data in open windows may be lost.
To perform a soft reset
•
Use the stylus to press and hold the Reset button for about two seconds.

Clearing Memory (Resetting to Factory Defaults)

Caution
Clearing memory deletes all data and restores the Model 70 to its default settings.
Programs installed at the factory remain, while data you have created and programs
you have installed are erased.
Conseil
L'effacement de la mémoire supprime toutes les données et rétablit les paramètres par
défaut du Model 70. Les programmes installés en usine sont conservés. Cependant,
les données que vous avez créées et les programmes que vous avez installés sont
effacés.
Note: Make sure you back up your Model 70 data so that if you need to clear memory,
you can restore the data on your Model 70.
7-3