Intermec 70 User Manual page 37

To select an alternate word or return to the original writing
1. Tap and hold the word that you want to change (tap one word at a time).
2. On the pop-up menu, tap Alternates. A menu with a list of alternate words appears.
3. Tap the word you want to use.
Or, tap the writing at the top of the menu to return to the original writing.
Tips for getting good recognition
•
Write neatly.
•
Write on the lines and draw descenders below the line. Write the cross of the "t"
and apostrophes below the top line so that they are not confused with the word
above. Write periods and commas above the line.
•
For better recognition, try increasing the zoom level to 300% using the Tools menu.
•
Write the letters of a word closely and leave big gaps between words so that the
Model 70 can easily tell where words begin and end.
•
Hyphenated words, foreign words that use special characters such as accents, and
some punctuation cannot be converted.
•
If you add writing to a word to change it (such as changing a "3" to an "8") after
you attempt to recognize the word, the writing you add will not be included if you
attempt to recognize the writing again.
Using the Model 70
2
2-13