Optional Accessories; Memory Board; Installing The Optional Memory Board - Brother MFC-9800 Owner's Manual
Brother mfc-9800: owners manual
Hide thumbs
Also See for MFC-9800:
- Service manual (229 pages) ,
- Specification (2 pages) ,
- Quick setup manual (4 pages)
Table of Contents
Advertisement
20
Optional Accessories
20
Memory Board
The memory board is installed on the main controller board inside the machine.
When you add the optional memory board, it increases the performance for both
fax and printer operations.
Model Name
MFC-9800 with Standard
Memory: 8MB
In general, the DIMM must have the following specifications:
Type:
CAS Lantency:
Clock Frequency: 66MHz or more
Capacity:
Height:
Parity:
DRAM Type:
Some DIMMs might not work with this MFC. For the latest information from
Brother visit:
Installing the Optional Memory Board
Caution:
DO NOT touch the surface of the main board within 15 minutes
after turning off the power.
1
Disconnect the telephone line cord, unplug the machine power cord from the AC
outlet, and then disconnect the interface cable.
Warning:
Unplug the power cord before installing (or removing) the memory
board.
20 - 1
O P T I O N A L A C C E S S O R I E S
16MB TECHWORKS 12456-0001
32MB TECHWORKS 12457-0001
100 pin and 32 bit output
2 or 3
16 or 32MB
46mm (1.8 inches) or less
NONE
SDRAM 4 Bank
http://solutions.brother.com
Optional Memory
Advertisement
Table of Contents
