Entering Photocapture Mode; Print Images; View Photos - Brother MFC-795CW User Manual

Entering PhotoCapture mode

After you insert the memory card or USB
Flash memory drive, the LCD displays the
PhotoCapture options.
The LCD shows:
PhotoCapture
View Enhance
Photos Photos
Press View Photos if you want to
quickly view and print your photos. See
View Photos on page 95.
Press Enhance Photos if you want to
add special effects to your photos. See
Enhance Photos on page 97.
Press Index Print if you want to print
an Index page (Thumbnails). You can also
print photos using the image numbers of
the Index page (Thumbnails). See Print
Index (Thumbnails) on page 96.
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 99.
Press the option you want to set.
Printing photos from a memory card or USB Flash memory drive

Print Images

13

View Photos

You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Index
Print
b
Note
• Eight thumbnails are displayed at a time
with the current page number and total
number of pages listed under the
thumbnails.
• Press d or c repeatedly to select each
photo, or hold down to scroll through all
photos.
• Press
c
d
e
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
Press View Photos.
Do one of the following:
If you want to choose photos to print
or print more than one for an image,
go to step c.
If you want to print all photos,
press .
Press Yes to confirm.
Go to step f.
to start Slide Show.
Press a photo from the thumbnail.
Enter the number of copies you want
either by pressing the number box
directly and enter the number you want
or pressing + or -.
Press OK.
Repeat steps c and d until you have
chosen all the photos that you want to
print.
13
13
13
95