Setting Your Favourites - Brother MFC-795CW User Manual

f
Do one of the following:
If you want to use a document as the
watermark, press Scan.
Place the document that you want to
use for the watermark on the scanner
glass and press Mono Start or
Colour Start.
The scanned data will be shown on
the LCD.
If you want to adjust the degree of
Transparency for your scanned data,
press Transparency.
Press d or c to adjust the degree,
and then press OK.
Go to step g.
If you want to use data from a media
card or USB Flash memory drive as
the watermark, insert the media card
or USB flash memory drive and then
press Media.
The image will be shown on the LCD.
Press the image you want to use for
the watermark.
Note
You can use your own image of up to
1280 × 1280 pixels as a watermark.
You can adjust the Position, Size,
Angle and Transparency of the
watermark. Press OK.
Go to step g.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
g
Press OK to confirm to use watermark.
Load the document you want to copy.
h
Enter the number of copies you want.
i
If you do not want to change additional
settings, press Mono Start or
Colour Start.

Setting your favourites

You can store the copy settings that you use
most often by setting them as a favourite. You
can set up to three favourites.
a
Press (Copy).
b
Choose the copy option and settings
you want to store.
c
Press d or c to display
Favorite Settings.
d
Press Favorite Settings.
e
Press Store.
Note
Set Watermark Copy to Off or
Template when storing Favorite
Settings.
f
Press the location where you want to
store your settings for Favorite:1,
Favorite:2 or Favorite:3.
g
Do one of the following:
If you want to rename your favourite
setting, press
characters. Then enter the new
name (up to 12 characters).
Press OK. (See Entering Text
on page 176.)
If you do not want to rename your
favourite setting, press OK.
Making copies
12
12
to delete
89