Checking and cancelling
waiting jobs
You can check which jobs are still waiting in
the memory to be sent and cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Remaining Jobs.
e
Press Remaining Jobs.
Any waiting jobs appear on the LCD.
f
Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
g
Do one of the following:
To cancel, press Yes.
If you want to cancel another job go
to step f.
To exit without cancelling, press No.
h
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
5
You can save the fax settings for
Fax Resolution, Contrast, Preview,
Real Time TX and Glass ScanSize you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press d or c to choose the setting you
want to change, and then press the new
option.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
d or c to display Set New Default.
d
Press Set New Default.
e
Press Yes.
f
Press Stop/Exit.
Restoring all fax settings to
the factory settings
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press
b
Press d or c to display
Factory Reset.
c
Press Factory Reset.
d
Press Yes.
e
Press Stop/Exit.
Sending a Fax
(Fax).
(Fax).
5
5
5
39