Out Of Memory' Message - Brother MFC-795CW User Manual

Chapter 12
Retrieving your favourite setting
When you are ready to use one of your
favourite set of settings, you can recall it.
a
Press (Copy).
b
Press Favorite.
c
Press the favourite setting you want to
retrieve.
Rename your favourite setting
After you stored your favourite setting, you
can rename it.
a
Press (Copy).
b
Press d or c to display
Favorite Settings.
c
Press Favorite Settings.
d
Press Rename.
e
Press the favourite setting you want to
rename.
f
Enter the new name (up to
12 characters). (See Entering Text
on page 176.)
g
Press OK.
90
'Out of Memory'
12
message
If the Out of Memory message appears
while scanning documents, press Stop/Exit
to cancel or Mono Start or Colour Start to
copy the scanned pages.
You will need to clear some jobs from the
memory before you can continue.
To free up extra memory, do the following:
12
Turn off Memory Receive. (See Memory
Receive (Monochrome only) on page 46.)
Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 52.)
When you get an Out of Memory
message, you may be able to make copies if
you first print incoming faxes in the memory to
restore the memory to 100%.
12