Sending A Fax Manually; Out Of Memory Message - Brother MFC-795CW User Manual

Chapter 5

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
If you are sending a multiple page fax, use
the ADF.
a
Press (Fax).
b
Load your document.
c
To listen for a dial tone, press
Speaker Phone on the machine or pick
up the handset.
d
Dial the fax number using the dial pad.
You can also enter the fax number on
the LCD by pressing Speed Dial and
Send a fax. (For details, see How to
Dial on page 62.)
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are sending from the scanner
glass, press Send on the LCD to send
the fax.
f
If you have picked up the handset,
replace it.
40

Out of Memory message

5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start or
Colour Start to send the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
Note
To free up space, wait until any jobs
stored in the memory have been sent,
cancel any waiting jobs (see Checking
and cancelling waiting jobs on page 39),
or send the fax in real time. (See Real
Time Transmission on page 37.)
5