Additional Sending Operations; Sending Faxes Using Multiple Settings; Contrast - Brother MFC-795CW User Manual

Chapter 5
Additional sending
operations
Sending faxes using multiple
settings
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, overseas mode, delayed
fax timer, polling transmission and real time
transmission.
a
Press (Fax).
b
Press d or c to display a setting you
want to change and press the setting,
then press the option you want.
c
Repeat step b to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 39.)
36

Contrast

If your document is very light or very dark, you
5
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
5
Use Light when sending a light document.
Use Dark when sending a dark document.
a
Press
b
Press d or c to display Contrast.
c
Press Contrast.
d
Press Auto, Light or Dark.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
(Fax).
5