Zektor Clarity Elite Quick Start Manual

Clarity Elite / Prowler

Quick Start Guide

(Full guide and protocol information are on the USB drive.)
1
1
P
RESS TO POWER ON
MEM 1 2 3
CLR 5 6 7
2
P
RESS AND HOLD TO POWER OFF
2
P
RESS AND HOLD
TO SELECT COMPOSITE
INPUTS
3
MEM 1 2 3
CLR 5 6 7
2
P
RESS TO CHANGE INPUTS
AUDIO VIDEO MATRIX SWITCH
4
       
VID
AUD
8 ENT 1 2 3 4 5 6
P
RESS TO SELECT ZONES
1
AUDIO VIDEO MATRIX SWITCH
4
       
VID
AUD
8 ENT 1 2 3 4 5 6
P
OWERING ON
1 To turn on: Press the
2 To turn off: Press and hold the
button until the Clarity Elite / Prowler
powers off.
7 8
H
OW TO MAP AN INPUT TO ONE OR
MORE ZONES
1 Press a button under a zone LED, the
LED will flash. By pressing multiple
zone buttons, multiple zones can be
selected.
2 Press an input button. All selected
zones will be mapped to the new
input. The zones will remain selected
7 8
and you can continue pressing input
buttons to remap zones.
3 Press and hold input buttons 1 through
3 to select the composite inputs:
• Button '1' selects 'A' inputs.
• Button '2' selects 'C' inputs.
• Button '3' selects 'E' inputs.
/
OFF
button.
POWER
POWER