Table of Contents
Advertisement
22 CVS4 Component Video Switch
The Rear Panel IR Jack
The rear panel jack labeled "IR / Z-IN" allows the CVS4 to be controlled by
hardwired IR controllers.
The signal can be either modulated or unmodulated:
25KHz to 250KHz
+3V to +12V
0V
+3V to +12V
0V
And uses a standard 1/8" (3.5mm) mini-plug:
SIGNAL
+3V to +12V
GND
The signal voltage can range from +3V to +12V, with a nominal value of +5V
recommended.
The signal can be either unmodulated, or modulated with a modulation fre -
quency ranging from 25KHz to 250KHz.
The IR jack recognizes the same IR codes as the front panel IR sensor.
MODULATED SIGNAL
UNMODULATED SIGNAL
CVS4 Component Video Switch
2
Advertisement
Table of Contents
