Table of Contents
Advertisement
3. Press
on the remote controller to switch between CH1
full screen, CH2 full screen and 2-split screen display. (see
below)
CH1 full screen
4. Press
on the remote controller in LIVE mode to show
OSD operation setting. (See below)
(a) Speed alarm: Press
will alarm when driving speed exceed the speed limit.
(b) Time setting: If GPS is not available, press
time setting with the built-in clock
(c) Firmware version display: Press
firmware version.
5. Press audio recording On/Off button on the remote controller
to turn off audio recording (
icon indicates that audio recording is on.
CH2 full screen
icon for setting speed limit. It
will show on the screen). A
11
Vehicle Video Recorder
User Manual
2-split screen image
icon for
icon to show
Advertisement
Table of Contents
