Table of Contents
Advertisement
J. Live Display
◆ Introduction of OSD Interface: (Video output from connecting
TV-OUT line to the device)
Live
1. If the screen shows
both channel 1 (left) and channel 2 (right) have video signal.
A
icon indicates that one channel has no video input.
Note: Even if there is no video input, the device still record that
channel (as long as there is power and SD card has no error). The
channel screen will display a blue background.
2. Even mode: A
recording. Press a
recording, the screen will show
indicates manual recording. A
recording activated by the G-sensor.
Audio recording on
Speaker
Energy saving
on the top right, it means that
icon indicates normal (continuous)
icon on remote controller for force
10
Vehicle Video Recorder
Event Mode
GPS
Camera 1
Camera 2
icon on the right top
icon indicates emergency
User Manual
Video 2
Video 1
GPS Information
Advertisement
Table of Contents
