Connecting The Monitor To A Power; Turning The Power On - Princeton SENergy 914 Reference Manual

Connecting the monitor and turning the monitor on and off
Connecting the monitor to a power source

Turning the power on

1. Turn on the main power of the monitor.
- When switching the main power switch on and
off, always wait for an interval of at least 5
seconds. Rapid switching may result in.
malfunction.
2. Press the monitor's POWER button.
The power LED will light up orange.
3. Turn on the computer.
When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed. (After power is turned on, it may take a
little time until the screen is displayed.)
- If the input terminal to which the computer is
connected has not been selected, the screen will
not be displayed. If necessary, perform input
terminal switching. (P7.)
Notes：
- When using an analog signal, perform an automatic
screen adjustment under the following conditions
(P10.)
- Using the monitor for the first time.
- After having changed the system settings during
use.
6