Table of Contents
Advertisement
Adjusting the screen display
Adjustment can be made using On Screen Display
(OSD) Menu provided.
On Screen Display for adjustment
This chapter provides the procedure how to adjust
the screen by using operation Pattern.
How to adjust
1.Press the MENU button.
The COLOR Menu will be displayed.
COLOR
9300
6500
6500
R-CONTRAST
G-CONTRAST
B-CONTRAST
INPUT-1
ANALOG
1280x1024 V:60Hz H:64.0kHz
At this point relevant menu options can be adjusted.
Each time MENU button is pressed the next menu
is selected. (COLOR
Menu disappears)
Note:
- The OSD Menu automatically disappears
approximately 30 seconds after the last command.
5000
USER
MODE SELECT
OSD
(When using a digital signal)
COLOR Menu
COLOR
9300
6500
6500
R-CONTRAST
G-CONTRAST
B-CONTRAST
INPUT-1
ANALOG
1280x1024 V:60Hz H:64.0kHz
Notes:
- Use the
buttons to select [9300], [6500], [5000]
or [USER].
- Selecting [USER] will display the setting values for
[CONTRAST], in order to make fine adjustments.
- Use the
/ MODE button to select [CONTRAST]
- To go to the next menu: MENU button
9300......Color tone bluer than standard
6500......Color tone standard setting
5000......Color tone redder than standard
USER
R-CONTRAST.....
G-CONTRAST.....
B-CONTRAST.....
14
5000
USER
button for blue-green
button for red
button for purple
button for green
button for yellow
button for blue
Advertisement
Table of Contents
