Princeton SENergy 914 Reference Manual page 13

Adjusting the screen display
GAIN CONTROL Menu
GAIN CONTROL
MANUAL
MANUAL
BRIGHTNESS
CONTRAST
INPUT-1 ANALOG
1280x1024 V:60Hz H:64.0kHz
MANUAL: Individual menu options are manually
adjusted.
AUTO: Every menu option is automatically
adjusted using the Auto Gain Control*
function.
Notes:
- Press the button to select [AUTO].
- To choose a menu option:
- To go to the next menu: MENU button
*Auto Gain Control function
- The Auto Gain Control adjusts contrast and
brightness based on the brightest and darkest colors
of the image displayed. If you are not using the
Adjustment Pattern it is necessary to have black
Area and white area of at least 5 mm × 5mm on
the screen. Adjustment may not be possible without
those areas.
- If the signal coming from the computer is
composite sync or sync on green, automatic
adjustment cannot be performed. Please perform
manual adjustment instead.
- If [OUT OF ADJUST] is displayed, perform
manual adjustment.
- When using the Auto Gain Control function, set
[COLOR] to other than [USER]. If [USER] is set,
the Auto Gain Control function cannot be used.
BRIGHTNESS
This feature changes the brightness level.
( buttons )
CONTRAST
This feature changes the contrast level.
( buttons )
AUTO
127
16
/ MODE button
(When using an analog signal)
COLOR Menu
COLOR
9300 6500
6500
R-CONTRAST
G-CONTRAST
B-CONTRAST
INPUT-1 ANALOG
1280x1024 V:60Hz H:64.0kHz
Notes:
- Use the buttons to select [9300], [6500], [5000]
or [USER].
- - Selecting [USER] will display the setting values
for [CONTRAST], in order to make fine
adjustments.
- Use the / MODE button to select [CONTRAST]
- To go to the next menu: MENU button
9300......Color tone bluer than standard
6500......Color tone standard setting
5000......Color tone redder than standard
USER (Note: for advanced users)
R-CONTRAST.....
G-CONTRAST.....
B-CONTRAST.....
12
5000 USER
button for blue-green
button for red
button for purple
button for green
button for yellow
button for blue