Table of Contents
Advertisement
1. INPUT button---------------------------- To switch between the signal's input terminals.
2. MENU button--------------------------- This button is used to pop-up, select and close the OSD (On Screen
3.
/ MODE button----------------------- When the OSD Menu is displayed:
4.
buttons------------------------------ When the OSD Menu is displayed:
5. Power button----------------------------- Pressing this button turns the power on.
6. Power LED------------------------------- This LED is lit green when in use and orange when in power-saving
7. Main power switch
8. Power terminal
9. Analog RGB input terminal 1 and 2-- The analog signal cable is connected here.
10.DVI-D input terminal------------------ The digital signal cable is connected here.
11. Security lock anchor------------------ By connecting a security lock (sold separately) to the security lock
12. Ventilation openings------------------- Note: Never block the ventilation openings as this may lead to
Product description
Display)
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
These buttons are used to select an option or adjust the value of
the selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
Press the button again to turn the power off.
Mode.
anchor, the monitor is fixed so that it cannot be transported.
(The security slot works in conjunction with Kensington Micro
Saver Security Systems.)
overheating inside the monitor and result in malfunction.
3
Advertisement
Table of Contents
