Table of Contents
Advertisement
Adjusting the screen display
MODE SELECT Menu
MODE SELECT
OSD H-POSITION
OSD H-POSITION
OSD V-POSITION
SCALING
LANGUAGE
INPUT-1
ANALOG
1280x1024 V:60Hz H:64.0kHz
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option:
- To complete adjustment: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD Menu can be moved to the
left and right. (
buttons )
OSD H-POSITION (OSD vertical position)
The position of the OSD Menu can be moved up and
down. (
buttons )
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
Note: will only work with resolutions other than
1280 x 1024.
(
buttons )
Note:
- When the display mode is set to less than 1280 ×
1024 pixels, the display is enlarged to cover the
whole screen (i.e. The side ratio of the display may
change).
LANGUAGE
You can choose the language used in OSD Menu.
1. Press the
button.
The Language Selection Menu will be displayed
on the screen
2. Use the
/ MODE button to choose a language.
3. Press the MENU button.
Language Selection Menu will disappear.
0
/ MODE button
( When using an analog signal )
13
Advertisement
Table of Contents
