Display Angle; Osd Control Options - Princeton VL154 Reference Manual

Rear View
1. Power Connector
end to the connector of the power cord. ( )
2. Signal Connector
the other to the LCD monitor. ( )
3. Audio in Connect the audio cable to the Audio In connector on the monitor and the
other end to the audio-out connector of your computer ( )

Display Angle

Tilting
For viewing clarity, you can tilt the LCD forward (up to -2 degrees) or backward (up to 15
degrees.)

OSD Control Options

CONTRAST
Adjust the contrast using + and − buttons.
BRIGHTNESS
Adjust the brightness using + and − buttons.
VOLUME
Adjust the speaker volume using + and – buttons.
AUTO TUNE
Press + or − buttons to make LCD monitor adjust the related parameters automatically
for optimal display status.
H - POSITION
Pressing ＋ moves the display image to the right; Pressing － moves the display image
to the left.
4
WARNING:
the cord/cable, be sure to hold the
connector instead of the wire part.
Connect one end of the power adapter to the monitor and the other
Connect one end of the signal cable to the rear side of computer and
CAUTION In order to protect the LCD, be sure
to hold the base when you adjust the LCD, and,
do not touch the screen.
When you disconnect