Table of Contents
Advertisement
1.
Set your bike on a strong table or workbench to make access easier.
2.
Lift the front forks and install the front wheel. Ensure the locking washers are inserted into
the holes on the forks.
3.
Insert the axle and spacer as shown above (in reverse)
4.
Install the two nuts on the end of the axle and tighten.
Pedals
1. Use a pedal wrench of 16mm spanner to tighten pedals.
2. Check and tighten pedal crank bolts with 14mm socket.
Tires
1. Inflate tire using a pump to 35-40 psi. Remember lower tire pressures will negatively impact
performance by causing too much resistance, but over inflating may cause the tube to burst.
Chain
1. Give the chain a light drop of bicycle chain oil or sewing oil. Do not use RP7 type
lubricants.
2. Adjust the chain tension to allow no more than ½" play between sprockets.
Front Wheel Installation Instructions
Other Helpful Instructions
20
Hide quick links:
Advertisement
Table of Contents
