Installing Front Wheel - X-TREME Rubicon 48V Owner's Manual

Figure 1
Figure 4
INSTALLING THE FRONT WHEEL
1. Make sure the brakes are loose enough to allow the brake pads easily.
2. Place wheel into fork drop outs (Figure 1).
3. Insert Quick Release Axle (Figure 2) as shown in Figure 3 & 4 with nut.
4. When axle is in place, push lever down on axle to lock into place (Figure 5).
5. Spin the wheel to make sure it is centered and clears the brake shoes. Tighten brakes if necessary.
**IMPORTANT**
It is very important to check the front wheel connection to the bicycle. Failure to properly tighten may cause the front wheel to dislodge.
30
Figure 2
Figure 3
Figure 5