Vhf Basic Operation; Turning The Power On And Adjusting Dimmer; Selecting Channel Modes, Channels; Adjusting Volume Of Loudspeaker - Furuno FM-8800D Operator's Manual

1. OPERATIONAL OVERVIEW
1.2

VHF Basic Operation

1.2.1

Turning the power on and adjusting dimmer

To turn the power on, turn the VOLUME/POWER control clockwise until you
hear a click.
To adjust the dimmer of the display, press the SHIFT key and press [2] key
several times to set a suitable dimmer. The DIMMER LEVEL box appears to
show the setting level. The dimmer changes 0 (minimum) to 9 (maximum).
1.2.2

Selecting channel modes, channels

Selecting channel modes
To change the channel mode, press the SHIFT key immediately followed by the
7 INT/USA key. Repeat this operation. The following modes are available.
INTL
USA
WX
CANADA
INLND-W
PRIV
MEMO
Note: Private channels are available only where permitted by the authorities.
The USA, WX, CANADA, INLND-W, PRIV can also be set by a qualified
serviceman.
Selecting channels
Rotate the CH selector clockwise (counterclockwise) to display desired channel.
Use [2] key or [8] key at the remote station to set private channel or memory
channel.
1.2.3

Adjusting volume of loudspeaker

The VOLUME control adjusts the volume of the loudspeaker.
1-8
DIMMER LEVEL
LEVEL (0-9)
<
: International mode
: USA mode
: Weather channel mode
: CANADA mode
: Rhine river mode (USED ON INLAND Waterways)
: Private channel
: Memory channel mode if registered
>9