Furuno FM-8800D Operator's Manual page 128

APPENDIX
Lock lever:
the front panel.
Cutter:
Paper feed slot:
Setting the DIP switch
The DIP switch at the top of the frame functions to change printer specifications.
Default specifications are shown in the table below.
TABLE1 Setting DIP switch
Function
Small characters
Normal character
Inverted printing
Upright printing
22 digits printing
20 digits printing
International characters
Printer mechanism compensation
Auto line feed
TABLE 2 International characters
Function
Japan
United States
Germany
England
France
Spain
Italy
Sweden
TABLE 3 Printer mechanism compensation
The left and right printing positions may vary over the course of a voyage. Printing position
is adjusted at the factory, however friction, etc. may cause misalignment. If misalignment
occurs, adjust printing position.
Addition to standard
0
-1
+1
+2
AP-22
Locks the front panel. The LOCK position prevents opening of
Cuts paper. Pull up the paper to cut it.
Feeds paper.
1 2
ON
OFF
ON
OFF
4 5 6
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
7 8
OFF OFF
OFF ON
ON OFF
ON ON
3 4 5 6
ON
OFF
Ref. TABLE 2
7 8 9 10
No
use
Ref. TABLE 3
ON