Furuno FM-8800D Operator's Manual page 49

8. COMM MODE is selected; press the ENT key. (for ROUTINE only)
9. Choose TELEPHONE or DATA as appropriate followed by pressing the ENT
key. The COMM OPTION always shows NO INFO.
For the COAST CALL/ROUTINE, go to step 13. For the SHIP CALL/
ROUTINE, go to step 10.
10. Choose CH and press the ENT key. The following window appears.
11. Choose SELECT CH or MANUAL as appropriate followed by pressing the
ENT key.
12. If you chose SELECT CH, the following channel list appears. Rotate the CH
knob (or press up / down arrow key) to choose a channel you wish to
communicate over and then press the ENT key.
CHANNEL
09 25
01 17
10 26
02 18
11 27
03 19
12 28
04 20
13 21 60
05
14 22 61
06
15 23 62
07
16 24 63
08
(For COAST CALL/SAFETY)
If you choose MANUAL at above step, enter channel number desired with
numeric keys.
13. Press the CALL key more than three seconds to transmit the message.
3. DSC OPERATION FOR NON-DISTRESS CASES
TELEPHONE
DATA
SELECT CH
MANUAL
64 73 81
65 74 82
66 75 83
67 76 84
68 77 85
69 78 86
71 79 87
72 80 88
SIMP CHANNEL
06 15 73
08 16 74
09 17 75
10 67 76
11 68 77
12 69 87
13 71 88
14 72
(For SHIP CALL/
ROUTINE and SAFETY)
3-3