Safety Instructions - Furuno FM-8800D Operator's Manual

SAFETY INSTRUCTIONS

WARNING WARNING
Do not open the equipment.
Hazardous voltage which can
cause electrical shock, burn
or serious injury exists inside
the equipment. Only qualified
personnel should work inside
the equipment.
Do not approach the antenna
closer than 0.9 m (MPE by
FCC) when it is transmitting.
The antenna emits radio waves
which can be harmful to the
human body.
RF power density
on antenna aperture
100 W/m
FM-8800D/
10 W/m
8800S
2 W/m
(MPE: Minimum Permissible Exposure)
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can result.
Turn off the power immediately if water
leaks into the equipment or the equip-
ment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Do not place liquid-filled containers on
the top of the equipment.
Fire or electrical shock can result if a
liquid spills into the equipment.
ii
Description
Distance
required by
2
0.11 m IEC 60945
2
0.33 m
IEC 60945
2
MPE by FCC
0.9 m
WARNING WARNING
Do not operate the equipment with wet
hands.
Electrical shock can result.
Keep heater away from equipment.
Heat can alter equipment shape and melt
the power cord, which can cause fire or
electrical shock.
Any repair work must be done by a
licensed radio technician.
Improper repair work can cause electrical
shock or fire.
CAUTION
Do not touch any part of the antenna
when the equipment is transmitting.
Electrical shock can result.
Use the proper fuse.
Use of a wrong fuse can result in fire or
cause permanent damage to the equipment.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Terminal, Communication
Unit
Name: Warning Label (1)
Type: 86-003-1011
Code No.: 100-236-231