Furuno FM-8800D Operator's Manual page 129

Printing test
Turn on the power while pressing and holding down the FEED switch to start the test
printing. All standard characters and six lines of filled squares are printed and then the
equipment goes into ON-LINE. To stop printing during the test, hit the SEL key.
NOTE1: Below are samples for 20 digits printing.
NOTE2: The program number and date will be different on your printout.
Remedy for paper jam
1) Turn off power
When paper jam, turns off power immediately.
2) Cut off roll paper
Open the panel and cut the paper as below.
3) Detaching the font panel
Push the right-and left hooks on the frame to unlock the panel and then pull up the
panel.
2004
Cut paper here
Paper feed slot
Pull up
Push here
Hook
APPENDIX
AP-23