Table of Contents
Advertisement
5
To fax by entering the fax number directly using the 10-Key Pad
1
Press the [Fax] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
3
If necessary, change the "Resolution" setting (p. 5-6).
4
Using the 10-Key Pad, enter the fax
number of the recipient.
H
F codes (SUB and SID) can also
be entered. Refer to "Using F
codes [CD]" on page 6-9.
?
Have you entered the number correctly?
§
The fax number can contain a maximum of 30 digits.
§
The keys that can be used to enter the fax number are: the number
keys (0 through 9),
§
If the [Redial/Pause] key is pressed while entering the fax number,
a 3-second pause is added. A pause appears as "P" in the display.
§
If you wish to change the fax number, press the [No] key, and then
enter the correct number.
§
If the machine is connected to a PBX line and the outside line
access number has been specified in the communication settings,
enter "#" to dial the outside line access number automatically.
5
Press the [Start] key to begin scanning and sending the fax.
5-2
, #, Space, and Pause
Faxing
Di1610f
Advertisement
Table of Contents
