8
8.7
When the Message "PAPER SIZE ERROR" Appears
If the paper size specified for a paper tray differs from the size of the paper
loaded in the tray, the message shown below appears when paper is fed
from that tray.
Check the message for the paper tray and the paper size to be fed, and
then load paper according to the corresponding procedure described
below.
For Tray1
1
Select "TRAY1 PAPER".
H
Refer to "7 Using the Utility Mode [CD]" in the extended manual on
the CD-R.
2
Press the [1] key of the 10-Key Pad,
and then specify the correct paper
type and size.
H
Refer to "7 Using the Utility
Mode [CD]" in the extended
manual on the CD-R.
3
Remove the Bypass Tray, and then
remove all paper from Tray1.
8-20
When a Message Appears
A4
A5
B5
Di1610f