Chain Dialing Speed Dial Numbers; Saved Number Redial - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Chain Dial Speed Dial
Numbers:
1. Access a CO line.
2. Press the SD button of the
telephone number to be
dialed.
. . . or . . .
Press the Speed Dial
button and dial the Speed Dial
code for the telephone
number to be dialed.
3. Repeat Step 2 to dial another
telephone number.
To Save a Telephone Number:
1. While on a call that you
dialed, press the Save Last
Number button.

CHAIN DIALING SPEED DIAL NUMBERS

You can call two or more Speed Dial numbers during one call. This
enables you, for example, to add additional parties (conference calls) to
your conversation with Speed Dialing.
You can access a CO line by pressing a Line or Pooled Line Grp button,
or by dialing an access code (7 0 1~ 7 0 4 for DK8, 7 0 1 ~ 7 0 8 for
DK16 for a line number; 8 1 ~ 8 4 for DK8, 8 1 ~ 8 8 for DK16 for a line
group; and 9 for the general group or Least Cost Routing).
The button can be used if your telephone does not have the Speed
*
Dial button.
Station Speed Dial codes are 1 0 ~ 4 9, and System Speed Dial codes
are 6 0 ~ 9 9.

SAVED NUMBER REDIAL

This feature enables you to store a dialed telephone or station number,
then redial that number with the touch of a button. Your telephone must
be assigned with the Save Last Number button in system programming.
You can press the button anytime after you have dialed the final digit of
the telephone number, but you must do it before you hang up or
disconnect the call.
FEATURE OPERATION
2-11