Arming Perimeter Only (Stay) - ADEMCO VISTA-20SEA User Manual

Using the 3
Use this key when you are staying home, but might expect someone to use the entrance door
STAY key
later.
When armed in STAY mode, the system will sound an alarm if a protected door or window is
NOTE:
opened, but you may otherwise move freely throughout the premises. Late arrivals can enter
Failure to close an
open exit route zone through the entrance door without causing an alarm, but they must disarm the system within the
before the exit delay
entry delay period or an alarm will occur.
time ends may result in
that zone being auto- Close all protected perimeter windows and non-main exit doors before arming (see
matically bypassed at
CHECKING FOR OPEN ZONES section).
that time
1.
2.
You can restart the exit delay at any time after arming in the STAY mode by pressing the
key. This is useful if you wish to open the entry/exit door to let someone in after arming the
system. This avoids having to disarm the system and then arm it again.
ARMING PERIMETER ONLY
(With Entry Delay ON)
STAY
+ 3
(Security Code)
S
ARME D T AY
ENTER SECURITY CODE THEN PRESS STAY
Example: 7 2 9
LISTEN FOR 3 BEEPS
The keypad will beep three times and will display the armed
STAY message. The red ARMED indicator also lights.
– 13 –
6 then press the STAY key.