Table of Contents
Advertisement
Basic Operation
Menu Bar
For detailed functions of each menu, see "Menu Tree" on pages 70-71.
Main Menu
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Input
①
Used to select an input source from Computer 1, Computer ,Video or S-video .
PC adjust
②
Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area-H and Display area-V to adjust
the parameters to match with the PC input signal format (p.32-34).
Image select
③
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.35).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.42).
Image adjust
④
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B),
Sharpness and Gamma] (pp.36-37).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., white balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.43-44).
Screen
⑤
For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/– ]
(pp.36-37).
For Video source, used to set size of image [Normal, wide and Custom] (p.45).
Sound
⑥
Used to adjust the volume or mute the sound (p.26).
Setting
⑦
Used to set the projector's operating configurations (pp.46-59).
Information
⑧
Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter , Power management, Key lock, PIN code lock and Remote control (p.60).
Network
⑨
See the owner's manual of "Network Set-up and Operation".
Guide
⑩
The key operation is displayed.
4
Sub-Menu
(pp.29-30,39-40).
RGB(PC digital)
Advertisement
Table of Contents
