Video System Selection - Eiki LC-XB100 Owner's Manual

Video System Selection
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
8

Use the Point buttons to select Video or S-video
ed
or Computer 1(Component) and then press the
SELECT button.

Use the Point buttons to select System and then
ed
press the Point or the SELECT button. Use the Point
8
buttons to select the desired system and then
ed
press the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .4, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 105i, and 1080i.
✔Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
buttons to select Input and
ed
or the SELECT buttons.
AV System Menu (Video or S-video)
AV System Menu (Component)
Video Input
RGB(PC digital)
Component
41