Table of Contents
Advertisement
Handset Operation
Conference Calls
Adding Voice Mail to a Conference
The Conference Master can add voice mail to a conference. This enables participants
in a conference to listen to or leave a voice mail message during one phone call.
To add Voice Mail to a conference call (performed by Conference Master)
1. Press
2. Dial the voice mail (VM) extension number, then enter the VM mailbox and
security code. This adds the voice mailbox to the conference.
3. Press
conference members by pressing
Now, all parties in the conference can listen to or record a message to this voice
mailbox. Only the Master can control the VM with touchtones or Soft Keys.
Connecting Two Outside Lines
1. While talking on an outside call, press
extension LED flashes (conference rate).
2. Dial an outside line access code and outside phone number.
3. After the party answers, press
and all parties are conferenced.
If you receive a busy tone or if the station does not answer, press the flashing
extension button to return to the original connection, press
4. Hang up. The extension LED flashes (exclusive-hold rate) and the two lines are
connected. The LED turns Off when the parties hang-up.
5. To supervise a tandem call, press the extension button. If the parties have finished,
hang up or if the parties are still talking, press
LEDs turn Off and the connection is released.
If your phone company provides auto disconnect, the connection may release
automatically when the parties hang up. If not, the lines must be supervised to be
disconnected.
26
to place the current call on Consultation Hold.
to reconnect to the original party. (You can continue to add
Strata DKT2104-CT Cordless Digital Telephone 01/02
and dialing another extension.)
. You hear dial tone. The
. The extension LED flashes (in-use rate)
and hang-up. Both Line
.
Advertisement
Table of Contents
