Voice Cannot Be Transmitted To Other Party (Outgoing Call) - Toshiba FT-8939 Service Manual

6. Voice cannot be transmitted to other party (outgoing call).

Can the base and handset be
connected?
OK
The 1 kHz, 9.0mV sine
wavefor m i s a p p l i e d t o
MC401 + side, can the 1 kHz
sine waveform from pin 24 of
IC403 be fed?
OK
Check whether there is the
1 kHz sine wavefor m at
pin 20 of IC403.
OK
Check whether there is the
1 kHz sine wavefor m at
pin 23 of IC403.
OK
TX output signal from the
handset is detected by the
liner detector, can the 1 kHz
sine waveform be fed?
OK
Check whether there is the
1 kHz sine waveform at pin 9
of IC3 on the base unit.
OK
Check whether there is the
1 kHz sine waveform at pin 3
of IC1.
OK
Check whether there is the
1 kHz sine wavefor m at
pin 6 of IC1.
OK
Check whether there is the
1 kHz sine waveform at the
Q3 collector.
OK
Check whether the 1 kHz sine
wavefor m from TEL-line
output is fed.
OK
Check MC401 of handset.
NG See 3. The base and handset
cannot be connected.
NG Check Q404 and its
peripheral circuit.
NG Check IC403 and its
peripheral circuit.
NG Check RT403 and its
peripheral circuit.
NG
Check handset RF unit.
NG Check IC3, Q1 and their
peripheral circuit.
OK
NG Check RT2, Q2 and their
peripheral circuits.
NG Check IC1 and its
peripheral circuit.
NG Check Q3 and its peripheral
circuit.
NG Check T1, RL1 and their
peripheral circuits.
23
NG
Check base RF unit.