Table of Contents
Advertisement
Installation
Step 9: Install Headset (Optional)
Step 9: Install Headset (Optional)
The optional headset provides a hands-free option because you can use the belt clip to
carry the handset and conduct a conversation. All feature operations remain the same
except the handset earphone and microphone are disconnected.
Open the cover over the headset jack that is located on
the side of the handset and plug in the headset as
shown at right..
Important!
Step 10: Install Belt Clip
The belt clip is designed to fit snugly onto the handset.
Note
1. Remove the belt clip tab from the top rear of the handset
(shown at right).
2. Slide the belt clip into the space where the belt clip tab was,
carefully aligning the belt clip sides to the notches.
3. Use the belt clip to attach the handset to your belt or pocket.
To remove the belt clip
1. Pull the belt clip release button back (shown at right).
2. Carefully lift the belt clip off.
14
Only use headsets especially designed or
modified for use with radio frequency
equipment.
Strata DKT2104-CT Cordless Digital Telephone 01/02
4509
4385
Apply
Pressure
Push
4508
Advertisement
Table of Contents
