Release and Answer
This feature enables you to automatically disconnect or transfer an active call and
answer a new call with the push of a button, instead of with the handset.
Note
Your telephone must be programmed with
Press the
new incoming call while you are connected to the existing call. You hear a muted,
Busy Override or Camp-on-busy tone. The original call is released and you can
answer the new call.
...or
. This transfers the original call and answers the new call.
...or
transfers the original call and answers the new call.
Speed Dial
Speed Dial enables you to dial a sequence of up to 32 digits with a shorter code. Dial
sequences can include telephone numbers, authorization codes, passwords feature
activation codes and pauses. Speed Dial may be used to originate a call or invoked
after a call is established.
There are two types of Speed Dial.
Station – Your CTX System Administrator allocates a block of up to 100 personal
•
speed dial numbers in increments of 10 per phone. You have exclusive use of them.
System – All telephones in your system can share a list of up to 800 System Speed
•
Dial numbers under the exclusive control of the CTX System Administrator. In
some cases, System Speed Dial will allow you to reach numbers that you would
not be allowed to dial directly from your telephone.
Make a Call Using Speed Dial
There are three ways to begin a Speed Dial Call.
Dial
...or press
Strata DKT2104-CT Cordless Digital Telephone 01/02
and dial a "transfer-to" destination. Then, press
of a "transfer-to" destination, then press
. The Line or extension LED flashes to indicate a
Features
Release and Answer
.
. This
51